Solidarity Bike Update Aug 21st

The frame is nearing completion! I'd say it's about 90% done. I added 4 more tubes (two finger separations and the thumbnail) and cut three more tubes but haven't welded those on yet.

I still have the rear dropouts to do, with a bit of complicated triangulation at the top, and I have to cut the frame straight down between the index and middle fingers all the way through the bottom tube, to accept a head tube (actually a chain link fence top rail!).

I also took a wheel and tire I had laying around, and the fence rail, and layed them out to approximate how it will look when done. I'm going to use 26" wheels instead of 20s, just because that's what I have and it'll make the gearing a little easier.

That's all for now!